Swissguard Suit 2.0

Swissguard Suit 2.0 supplied by S-GARD

Improved visibility for enhanced protection

The S-GARD SWISSGUARD series is our particularly visible protective fire service clothing range made of soft, lightweight material. It is suitable for firefighting, interior deployments with breathing apparatus and rescue operations.

The coat’s reflective striping in a Bodylanguage design makes you highly visible and therefore optimizes your safety during operations. This series combines lightweight materials, a movement-friendly cut and well-designed features to bring you outstanding comfort and reliable suitability for practical use.

Standards

EN 469:2005 Cl.2

Features S-GARD SWISSGUARD 2.0 COAT

Adjustable ergonomic collar
PRX Airflow shoulder protectors:
PRX Airflow padding elements relieve the pressure on strained shoulder and back areas while maintaining insulation. The individual pads of foamed, permanently elastic and flame-resistant special polymer material are arranged in a way that promotes the exchange of air between the back and chest areas, thereby increasing comfort.
MOVE+ design: The Move+3D cut features preformed, three- dimensional sections on the elbows, knees and collar as well as special wedge inserts in the lower sleeves of the coat and in the gusset area of the pants for a greatly improved fit. The 3D design enhances maneuverability during climbing and stretching movements and when you’re performing overhead work.
Microphone holder on the panel
Two height-adjustable radio pockets
Flaps with reinforced grips made of DuPont™ Nomex/Kevlar® with silicon carbon coating and PRX Airflow
Additional universal pocket with safety snap hook on the right
Two loops with D-ring
IRS-ready with tunnel and DTS pocket: The integrated rescue and restraint sling, or IRS for short, is an integrated part of the firefighter’s coat and therefore always ready for use when you need it.
Waterproof panic zip
Napoleon bag
Two side pockets with snap-hook loops
Snap hook
Tool loop on left
Extended back section
Ergonomically shaped sleeves with elbow reinforcements made of made of CeraHex abrasion protection and width adjusters
Preformed sleeve hem for optimum protection and ease of movement
Hem edging made of DuPont™ Nomex/Kevlar® with silicon carbon coating
Knitted cuffs with ITC system: Secure closure – perfect fit. S-GARD cuffs made of DuPontTM Nomex® special knitwear safely seal off your coat’s sleeves. You can use the “Individual Thumb Control” (ITC) system to adjust the thumb opening to suit your hand size.
Reflective striping in a Bodylanguage design with quadruple seams
Two inspection openings
Inner pocket with ID tab

Features S-GARD SWISSHUNTER PANTS

Comfort suspender system
Leg width adjustment
PRX9000 kidney protectors
Front zip with hook-and-loop and snap
Two side openings with integrated pocket
Flexible crotch
Two bellows pockets, right pocket with additional knife pocket
Flaps with reinforced grips made of DuPont™ Nomex/Kevlar® with silicon carbon coating
Preformed knee protectors made of DuPont™ Nomex/Kevlar® with silicon carbon coating and para-Aramid fleece padding
Access gusset with cover strip and hook-and-loop closure
TETRA finishing in the lower leg section
Heel cutout, hem edging and ankle section made of DuPont™ Nomex/Kevlar® with silicon carbon coating
Reflective striping with quadruple seams
Two inspection openings

Technology and Materials

Face fabric type 812: DuPont™ Nomex® Comfort Ripstop with reinforcement mesh, 195 g/m², 88% DuPont™ Nomex®, 10% DuPont™ Kevlar®, 2% P140 anti-static
Moisture barrier: GORE-TEX FIREBLOCKER®
Insulation/lining: Special fabric 200 g/m², 93% DuPont™ Nomex®, 5% DuPont™ Kevlar®, 2% P140 anti-static

Sizes