Home Firefighter Gloves Super Mars-E 5F

Super Mars-E 5F

by Marcus
SUPER MARS-E 5F

Super Mars-E 5F supplied by ESKA Gloves

Super Mars-E 5F GORE-TEX leather firefighting glove with knitted cuff

The short, waterproof leather firefighter glove Super Mars-E 5F offers maximum flame resistance and sensitivity due to the robust, soft Fire Block leather.

The lining provides maximum cut protection (highest level 5F). The GORE-TEX insert protects against water and wind, with the highest breathability, at the same time.

Description

The short leather firefighter glove Super Mars-E 5F with knitted cuff impresses with highest protective features and high sensitivity. The robust and soft Fire Block leather provides maximum flame and water resistance and has no shrinkage, even at the highest temperatures (0% according to ISO 17493/EN 659, although maximum 5% are permitted).

The coated Kevlar® knuckle protection offers additional abrasion and heat protection. The Kevlar® reinforcement with PROmarble coating in the palm provides additional protection. Due to the revolutionary, multilayered cut-resistant lining made of Kevlar®/Inox/LCP, Super Mars 5F boasts high performance protection against cuts and sharp edges.

The GORE-TEX insert protects against water and wind, with the highest breathability at the same time. The 100 % Kevlar® knitted cuff provides a secure fixing under a jacket. All mechanical and thermal maximum values were achieved both in a new condition and after pretreatment consisting of 20 washes at 30 °C.

The inner lining is incorporated and the insert is attached and connected to the outer shell in line with the proven method patented by ESKA in order to permanently prevent the lining from being inadvertently pulled out. The anatomical, layered 3D cut is adjusted to the natural posture of our hands, to guarantee the best possible fit and freedom of movement. We use only European materials, which undergo strict quality control in Austria.

The gloves for firefighters are available in versions with a 100% Kevlar® knitted cuff (Super Mars-E 5F model) or with a long cuff (Super Mars 5F model).

Technology & Material

  • GORE-TEX
  • Fire Block leather
  • PROmarble coating
  • Kevlar®
  • Ergonomic 3D cut
  • Cut-resistant lining

Material structure

Palm
Fire Block Leather

Backhand
Fire Block Leather, Kevlar®/PROmarble knuckle protection

Insert
GORE-TEX

Lining
Kevlar®, Cut-resistant lining made of Kevlar®/Inox/LCP

Performance levels

  • Certifications EN 659:2003 + A1:2008
  • Abrasion in new condition
  • Abrasion after 20 washes
  • Cut resistance in new condition
  • Cut resistance after 20 washes
  • Tear resistance in new condition
  • Tear resistance after 20 washes
  • Puncture resistance in new condition
  • Puncture resistance after 20 washes
  • Cut resistance TDM in new condition F
  • Cut resistance TDM after 20 washes F
  • EN 407:2020 Burning behaviour
  • Convective heat in new condition 22,8 sec.
  • Convective heat after 20 washes 14,9 sec.
  • Resistance to heat in new condition 26 sec.
  • Resistance to heat after 20 washes 30,9 sec.
  • Contact heat in new condition 13,9 sec.
  • Contact heat after 20 washes 13,2 sec.
  • Dexterity in new condition
  • Dexterity after 20 washes
  • ISO 15383 Water resistance Waterproof

ESKA Gloves logo

Super Mars-E 5F supplied by ESKA Gloves

Telephone: +43 (0) 7242 47292    Email: Click to email    Website: Click to visit website

To receive more details please complete the request form below.




    Your email address will never be shared with any 3rd parties and you will receive only the type of content for which you have requested.

    Other products by ESKA Gloves

    Related Articles

    This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More