Home Firefighter Gloves Phönix-E 5F

Phönix-E 5F

by Marcus

Phönix-E 5F supplied by ESKA Gloves

Waterproof textile firefighting glove with knitted cuff

The short textile firefighting glove Phönix-E 5F with knitted cuff offers best heat- and flame resistance and highest cut resistance.

The GORE-TEX CROSSTECH® Grip insert protects against water and viruses and the Nomex®/Kevlar® with PROmarble coating ensures maximum protection and grip.

Description

The textile firefighting glove Phönix-E 5F with knitted cuff provides optimum wear comfort and best heat and flame resistance. The flame-resistant Kevlar® material with PROmarble coating on the backhand offers high abrasion and heat resistance. The incorporated stretch absorber with air cushioning protects against hits, knocks and heat. Furthermore, heat protection and dexterity get increased due to the movement folds on fingers and thumb.

In the palm the Nomex®/Kevlar® material with PROmarble coating ensures maximum protection and grip on smooth and wet surfaces. The revolutionary cut-resistant lining made of Kevlar®/Inox/LCP protects the firefighter against pointed objects and sharp edges (level 4F).

Thanks to the GORE-TEX CROSSTECH® grip insert, Phönix 5F provides a safe barrier against water, chemicals, oil, fuel, blood and viruses with, at the same time, maximum breathability. The inner lining is incorporated and the insert is attached and connected to the outer shell in line with the proven method patented by ESKA in order to permanently prevent the lining from being inadvertently pulled out.

All mechanical and thermal maximum values were achieved both in a new condition and after pretreatment consisting of 20 washes at 60 °C. The 100 % Kevlar® knitted cuff provides a secure fixing under a jacket. The anatomical, layered 3D cut is adjusted to the natural posture of our hands, to guarantee the best possible fit and freedom of movement. We use only European materials, which undergo strict quality control in Austria. The gloves for firefighters are available in versions with a 100% Kevlar® knitted cuff (Phönix-E 5F model) or with a long cuff (Phönix 5F model).

Technology & Material

  • GORE-TEX CROSSTECH® Grip insert
  • PROmarble coating
  • Kevlar®
  • Nomex®
  • Ergonomic 3D cut

Material structure

Palm
Nomex® / Kevlar®, PROmarble coating

Backhand
Kevlar® with silicone/carbon coating

Insert
GORE® CROSSTECH® + Gore Grip Technologie

Lining
Cut-resistant lining made of Kevlar®/Inox/LCP, 100% Kevlar®

Performance levels

  • Certifications EN 659:2003 + A1:2008
  • Abrasion in new condition
  • Abrasion after 20 washes
  • Cut resistance in new condition
  • Cut resistance after 20 washes
  • Tear resistance in new condition
  • Tear resistance after 20 washes
  • Puncture resistance in new condition
  • Puncture resistance after 20 washes
  • Cut resistance TDM in new condition F
  • Cut resistance TDM after 20 washes F
  • EN 388:2016 Impact protection P
  • EN 407:2020 Burning behaviour
  • Convective heat in new condition 16,4 sec.
  • Convective heat after 20 washes 18,1 sec.
  • Resistance to heat in new condition 22,7 sec.
  • Resistance to heat after 20 washes 21,9 sec.
  • Contact heat in new condition 16,9 sec.
  • Contact heat after 20 washes 16,4 sec.
  • Glove heat shrinkage 0,7%
  • Dexterity in new condition
  • Dexterity after 20 washes
  • ISO 15383 Water resistance Waterproof

ESKA Gloves logo

Phönix-E 5F supplied by ESKA Gloves

Telephone: +43 (0) 7242 47292    Email: Click to email    Website: Click to visit website

To receive more details please complete the request form below.


    Your email address will never be shared with any 3rd parties and you will receive only the type of content for which you have requested.

    Other products by ESKA Gloves

    Related Articles

    This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More