Home Firefighter Hoods MSA Bristol Hoods

MSA Bristol Hoods

by Marcus
Bristol Hood 1

MSA Bristol Hoods supplied by MSA Safety

MSA Bristol supplies a range of firefighter hoods.

The Bristol Hood 1 is a breathable and wickable firefighter hood that offers protection against radiant and intense heat. It has a Pbi Gold outer with a Aramid Viscose inner. Manufactured to BS EN13911: 2004 is a universal size.

The Bristol Hood 2 is a breathable and wickable firefighter hood that offers protection against radiant and intense heat. It is manufactured from double-layer Carbonised Fibre/Para Aramid Blend. Manufactured to BS EN13911: 2004 is a universal size.

In addition to the jacket and trouser, a firefighter’s personal protection also depends on the careful selection of head, hand and foot protection. MSA Bristol supplies a range of flash hoods which have been carefully selected and tested for compatibility with the other garments to be used.

A special compatibility area within our technical and design department allows firefighters to check the all-round suitability of the complete ensembles being selected for use. MSA Bristol offers a wide selection of hoods for structural, wilderness and USAR operations.

BRISTOLHOOD1 PBI Gold Outer and Aramid Viscose Inner

  • Breathable and wickable fabric
  • Universal size

BRISTOLHOOD2 Double layer Carbonised Fibre/Para Aramid Blend

  • Breathable and wickable fabric
  • Universal size

BRISTOLHOOD5 Triple layer hood, PBI Gold with 2 layers of Aramid Viscose.

  • Breathable and wickable fabric, offering increased thermal protection

Flash Hood NFPA – HOOD7

  • Manufactured from 40% P84 / 60% Lenzing
  • Balaclava style
  • Colour – Yellow

Particulate Protection Hood BRISTOLHOOD6, BRISTOLHOOD7 & BRISTOLHOOD11

Nomex NanoFlex has been specifically developed to prevent contamination from potentially harmful particles.
The new material is flame-resistant with superior particle barrier performance, but is also highly breathable, thin and light-weight – essential characteristics for the prevention of heat stress, and for improving comfort.
Proven to be 99.8% efficient at filtering harmful smoke particles.

Options

  • Fire hood – PBI Gold Outer and Aramid Viscose Inner – Colour: Gold – BRISTOLHOOD1
  • Fire hood – Double layer Carbonised Fibre/Para Aramid Blend – Colour: Black – BRISTOLHOOD2
  • Fire Hood – PBI Gold and two layer Aramid Viscose inner – Colour Gold – BRISTOLHOOD5
  • Flash Hood NFPA – HOOD7
  • Particulate Protection Fire Hood – Nomex and Kevlar with Viscose/Modacrylic quilted with Nomex NanoFlex. Colour: Navy Blue – BRISTOLHOOD6
  • Particulate Protection Hood – Pbi/Twaron quilted with Nomex Nanoflex. Colour: Gold – BRISTOLHOOD7
  • Particulate Protection Hood –Pbi/Twaron fully quilted with Nomex NanoFlex. Colour: Gold – BRISTOLHOOD11

Approvals subject to change without notice and may differ based on configuration, part number and/or country.

Manufactured to the following standards (depending on the models)

  • BS EN13911: 2017
  • NFPA 1971: 2018 (Flash Hood NFPA – HOOD7)

MSA Safety

MSA Bristol Hoods supplied by MSA Safety

Telephone: + 44 (0) 800 066 2222   Email: Click to email    Website: Click to visit website

To receive more details please complete the request form below.


    Your email address will never be shared with any 3rd parties and you will receive only the type of content for which you have requested.

    Other products by MSA Safety

    Related Articles

    This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More