2.7K
LEADER Smoke 3 supplied by LEADER
Telephone: +33 (0) 235 530 575 Email: Click to email Website: Click to visit website
Head Office: 5 Rue Pierre et Marie Curie, Octeville Sur Mer, 76930, France
The LEADER Smoke 3 generates dense and realistic smoke for completely safe training sessions!
The LEADER Smoke 3 generator perfectly meets the training needs to fill small to very large volumes of smoke in few minutes!
Adjustable Flow Rate
- Produces light smoke or dense smoke.
Programmable Emission – Digital remote control panel for intuitive settings:
- Controlled volume of smoke required for each scenario (to fill small and large volumes),
- Select length of time for which smoke is to be produced,
- Select time interval between smoke emissions.
Permanent Heating System
- Continuous dense smoke production in order to avoid interruptions of operation during the programmed period.
Robust Compact Design
- Impact-resistant, splash-resistant outer casing
- Easy to transport
- Takes up little space
Detachable Sturdy Remote Control
- For initiating remote production of smoke
Continuous Operation at Reduced Flowrate by Default
- For maximum economy of fluid.
Characteristics:
- Heat Exchanger: 1200 W
- Heat up time: 7 minutes
- Overheat protection: yes (System DTPD : Direct Thermal Protection Device)
- Effective coverage: 600m³/min (17,757cfm) in continuous operation at reduced output
- Power consumption:
- 1200 W, 5.3 A @ 220 V 50/60 Hz
- 1050 W, 8.7 A @ 110 V 60 Hz
- Size: 485 x 335 x 242 mm / 19.1’ x 13.2’ x 9.6’
- Weight: 11,2 kg / 24.7 lbs
- Removable remote control: Digital with 3m (9.8 ft) cable
- Recommended fluids: LEADER Smoke fluid composed of water and glycol
- The smoke produced is safe and without any toxic hazard
- Low depot
- Environmentally friendly fluid
- Economic
- Fluid capacity: 2.5 litres (0.66 gal)
- Fluid consumption: 88 ml/min – 0.02 Gal/min
To receive more details, please complete the request form below.
