Jupiter-E 5F supplied by ESKA Gloves
Jupiter-E 5F Short GORE-TEX firefighter glove
The short GORE-TEX firefighting glove Jupiter-E 5F is permanently waterproof and consists of a 100 % Kevlar® knitted cuff. The high quality, fire-resistant materials provides maximum protection and grip.
The cut-resistant lining protects against sharp edges and pointed objects (highest level 5F).
Description
The short GORE-TEX firefighting glove Jupiter-E 5F is permanently waterproof and impresses with their outstanding dexterity and best protective properties. The fire-resistant Aramid/LenzingTM FR backhand material offers excellent fire resistance, the coated Kevlar® knuckle protection provides effective protection against abrasion and heat.
The palm made of Nomex®/Kevlar® with PROmarble coating (granite-silicone-carbon) offers maximum protection and grip on smooth and wet surfaces and boasts the best abrasion resistance.
The revolutionary cut-resistant lining made of Kevlar®/Inox/LCP protects against pointed objects and sharp edges (level 4F). The 100 % Kevlar® knitted cuff provides a secure fixing under a jacket. All mechanical and thermal maximum values were achieved both in a new condition and after pretreatment consisting of 20 washes at 60 °C.
The inner lining is incorporated and the insert is attached and connected to the outer shell in line with the proven method patented by ESKA in order to permanently prevent the lining from being inadvertently pulled out.
The anatomical, layered 3D cut is adjusted to the natural posture of our hands, to guarantee the best possible fit and freedom of movement. We use only European materials, which undergo strict quality control in Austria. The gloves for firefighters are available in versions with a 100% Kevlar® knitted cuff (Jupiter-E 5F model) or with a long cuff (Jupiter 5F model).
Technology & Material
- GORE-TEX
- PROmarble coating
- Kevlar®
- Nomex®
- Ergonomic 3D cut
- Cut-resistant lining
Material structure
Palm
Nomex® / Kevlar®, PROmarble coating
Backhand
Kevlar®/PROmarble knuckle protection, Aramid/LenzingTM FR
Insert
GORE-TEX
Lining
Cut-resistant lining made of Kevlar®/Inox/LCP, 100% Kevlar®
Performance levels
- Certifications EN 659:2003 + A1:2008
- Abrasion in new condition
- Abrasion after 20 washes
- Cut resistance in new condition
- Cut resistance after 20 washes
- Tear resistance in new condition
- Tear resistance after 20 washes
- Puncture resistance in new condition
- Puncture resistance after 20 washes
- Cut resistance TDM in new condition F
- Cut resistance TDM after 20 washes F
- EN 407:2020 Burning behaviour
- Convective heat in new condition 23,3 sec.
- Convective heat after 20 washes 22,6 sec.
- Resistance to heat in new condition 26,3 sec.
- Resistance to heat after 20 washes 25 sec.
- Contact heat in new condition 20,5 sec.
- Contact heat after 20 washes 16,4 sec.
- Glove heat shrinkage 0,0%
- Dexterity in new condition
- Dexterity after 20 washes
- ISO 15383 Water resistance Waterproof




Jupiter-E 5F supplied by ESKA Gloves
Telephone: +43 (0) 7242 47292 Email: Click to email Website: Click to visit website
To receive more details please complete the request form below.
Other products by ESKA Gloves
















