Home Helmets, Boots & GlovesFirefighter Boots Jolly Specialguard Firefighter Boot

Jolly Specialguard Firefighter Boot

by Greg Preston
Jolly Specialguard Firefighter Boot

Jolly Specialguard Firefighter Boot Supplied by Jolly Safety Footwear

The Jolly Specialguard Firefighter Boot 9052/A-C has a full-grain cowhide leather, waterproofed, 2.0 – 2.2 mm thick upper, a top lining of soft full-grain leather, waterproofed, 1.0 – 1.1 mm. thick and a lining of high breathable fabric Cambrelle® 100% PA.

  • Fire-fighters boot FIGHTERS
  • High visibility PPE
  • Lightweight and comfortable
  • Good stability both for walking and running
  • Abrasion-resistant rubber overcap
  • Total opening zipper easy and fast to clean
  • Padded rear flexors for an increased fitting comfort
  • Rear leather pull-on loop
  • High quality materials for a long lasting boot
  • Extremely comfortable for long-day usage (breathability is 600% 400% better than the European Standard EN ISO 20345 5.4.6 requirement)
  • Good water-resistance
  • The heat insulation is 10% higher than the European Standard EN15090 6.3.1 requirement (sandbath test) and 40% higher than the European Standard EN 15090 6.3.2 requirement (radiant heat)
  • Excellent grip on uneven grounds and stairs (the outsole is 40% more durable than the European Standard EN ISO 20345 5.8.3 requirement)
  • The sole bonding strength is 30% higher than the European Standard EN ISO 20345 5.3.1.2 requirement
  • The penetration resistance of the bottom is 50% higher than the European Standard EN ISO 20345 6.2.1 requirement
  • The energy absorption in the heel area is 80% higher than the European Standard EN ISO 20345 6.2.4 requirements
  • Outsole resistant to fuel, oil, heat and flame

Foot-bed

The Jolly Specialguard Firefighter Boot is anatomically shaped, made out of a layer of moisture transmitting felt (80% PES – 20% VISCOSA), and with an upper covering made of anti abrasion non wovenmaterial 100% PA. In the heel area is positioned an insert of EVA foam for the best comfort of the foot enabling to preserve the foot anatomy and to increase the energy absorption on the heel.

Insole

Average 8 mm thick insole made by a multilayer construction using special antiperforation composite textile material “Zero mm Perforation” at 1100 Newton according to the Standard EN 12568:2010, with a plastic reinforcement as stabilizer and completed with a felt filler on the bottom. Textile antiperforation insoles, compared to the old style metal plates, offer considerable ergonomics and safety advantages: more protective surface, flexibility, insulation, moisture
absorption, reduced weight.

Sole

The Jolly Specialguard Firefighter Boot nitrile rubber non-slip SRC cemented sole, heat resistant at 300°C, antistatic, oil and petrol resistant, high wear-resistant. Self-cleaning and foreign objects + debris free granted by the peculiar structure of cleats and running surface. The high energy absorption in the heel area is given by the rubber compound of the outsole and by the height and shape of its cleats. The height and shape of its inner net, with air cushion, improve both shock absorbing but also thermal properties.


Jolly Specialguard Firefighter Boot supplied by Jolly Safety Footwear

Telephone: +39 0423 666411    Email: Click to email    Website: Click to visit website

To receive more details please complete the request form below.




Your email address will never be shared with any 3rd parties and you will receive only the type of content for which you have requested.

Other products by Jolly Safety Footwear

Related Articles

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More