Home Firefighter Boots Jolly Explorer II Boot

Jolly Explorer II Boot

by Greg Preston
Jolly Explorer II Boot

Jolly Explorer II Boot Supplied by Jolly Safety Footwear

The Jolly Explorer II Boot 6011/GA-C has upper leather of full-grain cowhide leather, waterproofed, 2.4 – 2.6 mm thick a top lining full-grain soft aniline leather, 1.0 – 1.1 mm thick, rear flexor of soft waterproofed leather, padded with special foam to improve fitting comfort and a lining seam sealed 4 ply laminate (GORE-TEX® DURACOM CAMBRELLE).

  • Wildfire and public order operator boot
  • Lining: GORE-TEX® Performance Comfort footwear, excellent for various climate conditions and for outdoor activities
  • Lightweight and flexible wildfire boot, it offers excellent stability both for walking and running
  • Highly breathable (breathability 600% higher than the European Standard EN ISO 20345 5.4.6 requirement)
  • Water resistant boot tested to 500.000 flexing cycles according to the European Standard EN ISO 20345 6.2.5
  • Padded rear flexors
  • Fast and easy lacing system
  • Extremely comfortable for long-day usage
  • The heat insulation is 10% higher than the European Standard EN15090 6.3.1 requirements (sandbath test), and 60% higher than the European Standard EN 15090 6.3.2 requirements (radiant heat)
  • The penetration resistance of the bottom is 50% higher than the European Standard EN ISO 20345 6.2.1 requirement
  • The sole bonding strength is 30% higher than the European Standard EN ISO 20345 5.3.1.2 requirements
  • The energy absorption in the heel area is 100% higher than the European Standard EN ISO 20345 6.2.4 requirements
  • Outsole resistant to fuel, oil, heat and flame

Foot-bed

The Jolly Explorer II Boot is anatomically shaped, made out of a layer of moisture transmitting felt (80% PES – 20% VISCOSA), and with an upper covering made of anti abrasion non woven material 100% PA. In the heel area is positioned an insert of EVA foam for the best comfort of the foot enabling to preserve the foot anatomy and to increase the energy absorption on the heel.

Insole

Average 8 mm thick insole made by a multilayer construction using special antiperforation composite textile material “Zero mm Perforation” at 1100 Newton according to the Standard EN 12568:2010, with a plastic reinforcement as stabilizer and completed with a felt filler on the bottom. Textile antiperforation insoles, compared to the old style metal plates, offer considerable ergonomics and safety advantages: more protective surface, flexibility, insulation, moisture
absorption, reduced weight.

Sole

The Jolly Explorer II Boot has a nitrile rubber cemented sole, heat resistant at 300°C, antistatic, oil and petrol resistant, with energy absorption in the heel area, slip-resistant SRC. Selfcleaning and foreign objects + debris free granted by the peculiar structure of cleats and running surface. Thanks to the double density of the rubber compound, the shock absorption and the slip resistance are considerably improved.


Jolly Explorer II Boot supplied by Jolly Safety Footwear

Telephone: +39 0423 666411    Email: Click to email    Website: Click to visit website

To receive more details please complete the request form below.




    Your email address will never be shared with any 3rd parties and you will receive only the type of content for which you have requested.

    Other products by Jolly Safety Footwear

    Related Articles

    This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More