FPN 6000 Pump

by Marcus
FPN 6000 Pump

FPN 6000 Pump supplied by ZIEGLER

FPN 10-6000 Pump Technology

Ziegler’s FPN 6000 centrifugal fire pumps are high-performance, low-wear pumps with one- or two-stage design, robust, water resistant, extremely reliable and easy to maintain. The clear structure, easy-to-read control panels and automatic switching, ventilation and pressure control equipment have ensured the ease of use.

Our pumps can be updated at any time within their performance range, which means that is can easily be adapted to special conditions, e.g. foreign standards. Our centrifugal fire pumps are made of seawater-resistant and non-rusting materials and equipped with the unique Ziegler pump ventilation system TROKOMAT.

Our pumps are used as built-in pumps or portable pumps. Not only due to their exemplary ease of use, Ziegler pumps have been proven to be the best in the world.


Pump input

  • max. 195 (265) kW (HP)

Pump output

  • max. l/min 7.200


  • 128kg

Dimensions (LxWxH)

  • 750x650x700

Special accessories

on request, additionally charged: suction inlet 2x Storz 125, alternatively 1x DN 200, tank suction connection DN 200, up to 6 delivery outlets size B or optionally 2 delivery outlets size A lockable by intermediate flaps, up to 2 turret outlets, up to 2 delivery outlets to the rapid intervention lines, 1 outlet for tank filling line, installation of a pump proportioner, automatic p.t.o. engagement (ANS), automatic pressure governor (TOURMAT D), TROKOMAT PLUS shut-off, EAD, pumping unit.

ZIEGLER Centrifugal fire pumps in modular system

The proven ZIEGLER pumps are not only available in various performance sizes but depending on quantity and position they also can be provided with different delivery outlets, with automatic switching and pressure control as well as with various foam proportioning systems.

The demand for an extinguishing technology keeping the secondary water damages as small as possible will be met increasingly by sophisticated, electronic systems. The three-stage ZIEGLER high-pressure pump proven since almost 50 years and continuously developed will be switched on via an electro-magnetic coupling of the running normal pressure pump if required. Its impellers are fixed on an own pump shaft, thus they will not run along with at sole operation of the normal pressure pump.

This allows on the one hand an extremely compact design and on the other hand the wear will be reduced considerably.

All ZIEGLER pumps are prepared suitably for relatively easy retrofit with a highpressure pump. If the connection line from the normal pressure pump to the highpressure pump will be opened, the electro-magnetic coupling will be actuated simultaneously. Then, the delivery outlet to the high-pressure reel or the corresponding high-pressure outlet will be opened.

A thermal discharge line to the tank or at equipment with a pump proportioner to the outside prevents an overheating at interruption of the water delivery. Optionally, an additional warning buzzer is available.

The following operation modes are possible:

  • pure normal pressure pump operation (high-pressure pump stopped)
  • pure high-pressure operation (normal pressure pump in circulation only runs for supply of the high pressure pump)
  • combined pump operation (normal pressure and high pressure pump are running at the same time)
FPN 6000 Pump


FPN 6000 Pump supplied by ZIEGLER

Telephone: +49 7322 951 0    Email: Click to email    Website: Click to visit website

To receive more details please complete the request form below.

    Your email address will never be shared with any 3rd parties and you will receive only the type of content for which you have requested.

    Other products by ZIEGLER

    Related Articles

    This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More