Fomtec MB 5 supplied by Dafo Fomtec
Fomtec MB 5 have been designed to be used as a multipurpose foam for low, medium and high expansion foam. Fomtec MB 5 is intended for use on class B hydrocarbon fuels such as oil, diesel, gasoline and aviation fuels.
Fomtec MB 5 can be used with all kinds on low, medium and high expansion devices. Fomtec MB 5 is also effective against class A fires such as wood, paper, textiles etc. at 2% to 6% proportioning.
- Fluorine free
- 100 % biodegradable
- Approved: low and medium expansion foam
Fomtec MB 5 have been designed to be used as a multipurpose foam for low, medium and high expansion foam. Fomtec MB 5 is intended for use on class B hydrocarbon fuels such as oil, diesel, gasoline and aviation fuels. Fomtec MB 5 can be used with all kinds on low, medium and high expansion devices. Fomtec MB 5 is also effective against class A fires such as wood, paper, textiles etc. at 2% to 6% proportioning.
Typical applications are general firefighting of flammable liquids. Typical users are fire departments and general industry. Suitable for mobile firefighting by use of aspirating foam discharge devices such as foam branchpipes and monitors, where application rates and technique can be adjusted to the specifics of each incident. Or in systems designed for use with the product based on recommended minimum applications rates, application duration and discharge devices.
- Appearance – Yellowish liquid
- Specific gravity at 20°C – 1,017+/- 0.01 g/ml
- Viscosity at 20°C – ≤ 20 mPas
- pH – 6,5-8,5
- Freezing point – -15°C
- Recommended storage temperature – -15 – 55°C
- Suspended sediment (v/v) – Less than 0,2%
- Surface tension – ≤ 25 mN/m
Fire performance & Foaming
The fire performance has been measured and documented according to “International Approvals” stated in this document. The foaming properties are depending on equipment used and other variables such as water and ambient temperatures. Average expansion 9:1, average 25% drainage time 07:30 minutes using UNI 86 test nozzle.
Fomtec MB 5 can easily be proportioned at the correct dilution using conventional equipment such as:
- Inline inductors
- Balanced pressure, variable flow proportioning systems
- Bladder tanks
- Around the pump proportioning systems
- Water turbine driven foam proportioners
- Self-inducting branch pipes and nozzles
- High expansion foam generators
The equipment should be designed to the foam type. Fomtec MB 5 can be used with low, medium and high expansion foam generators.
Fomtec MB 5 is compatible with all water types. It is compatible with foam compatible dry chemical powders as well as other expanded foam types. For mixability with other foam concen-trates please contact Fomtec. For material compatibility please refer to Fomtec Technical Advices FTA 20 addressing the topic.
Fomtec MB 5 is non-hazardous, biodegradable substance formulated using raw materials specially selected for their fire performance and their environmental profile. The product is totally free from fluorinated surfactants and polymers and other organohalogens, and therefore it does not contain any PFAS. The handling of spills of concentrate or foam solutions should however be undertaken according to local regulations. Normally sewage systems can dispose foam solution based on this type of foam concentrate, but local sewage operators should be consulted. Full details will be found in the Materi-al Safety Datasheet (MSDS). For more detailed information please consult Fomtec Technical Advices FTA 40.
Stored in original unbroken packaging the product will have a ong shelf life. Shelf life in excess of 10 years will be found in temperate climates. As with all foams, shelf life will be depen-dent on storage temperatures and conditions.
For storage recommendations and material compatibility please refer to our Fomtec Technical Advices FTA 10 addressing the topic.
The foam concentrate should be tested annually. The testing should be made by a suitable laboratory for analysis of foam concentrates and should measure: pH, specific gravity, expansion, drainage time. Storage containers should be inspected and reevaluated for the suitability of the storage location in regard to temperature fluctuations (temperature should be as stable as possible). Exposure to direct sunlight should be avoided.
Fomtec supply this product in 25 litre and 5 US gallon cans, 200 litre and 55 US gallon drums, 1000 litre and 265 US gallon IBC containers. Larger bulk supply is available on special request.
- EN 1568 Part 1, 2, 3
Fomtec MB 5 supplied by Dafo Fomtec
To receive more details please complete the request form below.
Other products by Dafo Fomtec