FFFP ARC 3×3 NV Avalanche Supplied by Dafo Fomtec
Fomtec FFFP ARC 3×3 NV Avalanche is a high efficiency multipurpose alcohol resistant film forming fluoro protein foam (3×3) concentrate.
Fomtec FFFP ARC 3×3 NV is a liquid based on environmentally friendly natural protein and does not contain any polymer that makes general AR type foam concentrates viscous. Its high fluidity makes the induction easier and accurate through both portable and fixed inline proportioners even at extremely low temperatures (-18 C).
The advantage of Fomtec FFFP ARC 3×3 NV is the 3% induction ratio on all class B fires including polar solvents in fresh or seawater.
The low surface tension of the water foam concentrate solution enables the aqueous film, although heavier than the burning liquid, to float on top of the hydrocarbon fuel surface. The specially selected fluorocarbon surfactants ’seal’ the bubbles against attack from polar solvents and also provide a highly effective floating foam layer on top of the polar solvents.
Fomtec FFFP ARC 3×3 NV is intended for use on class B hydrocarbon fuel as well as on polar solvent i.e Isopropanol, Methanol etc and other foam destroying product fires such as MTBE. Typical applications are bulk storage tank protection, process areas, power stations, marine terminals, municipal fire departments, offshore platforms etc. It is compatible with all dry chemical powders.
Fire Performance & Foaming
Fomtec FFFP ARC 3×3 NV has been designed to give the best properties of
Aqueous film forming foam
Alcohol resistant foam
Fluoro protein foam
The fire performance of this product has been measured and documented according to “International Approvals” stated in this document. The foaming properties are depending on equipment used and other variables such as water and ambient temperatures. Average expansion 6:1, average ¼ drainage time 02:20 minutes using UNI 86 test nozzle.
Fomtec Avalanche firefighting foam is a high efficiency multi purpose film forming fluoro protein foam (3×3) concentrate. Fomtec Avalanche is a liquid based on environmentally friendly natural protein and does not contain any polymer that makes general AR type foam concentrates viscous.
Its high fluidity makes the induction easier and accurate through both portable and fixed inline proportioners even at extremely low temperatures (-18 C). The advantage of Fomtec Avalanche is the 3% induction ratio on ALL class B fires including polar solvents in fresh or seawater.
FFFP ARC 3×3 NV Avalanche supplied by Dafo Fomtec
Telephone: +46 850 640 566 Email: Click to email Website: Click to visit website
To receive more details please complete the request form below.
Other products by Dafo Fomtec
