AFFF ARC 3×3 S Supplied by Dafo Fomtec
Fomtec AFFF ARC 3×3 S firefighting foam is intended for use on class B hydrocarbon fuel as well as on polar solvent i.e Isopropanol, Methanol etc and other foam destroy-ing product fires such as MTBE.
AFFF ARC 3×3 SIt can be used with both aspirating and non-aspirating discharge devices. It is compatible with all dry chemical powders.
The product conforms with UL 162 as well as FM 5130 and has been tested listed with Sprinklers. Fomtec ARC 3×3 S has also been tested against Lastfire.
Fomtec AFFF ARC 3×3 S is a high efficiency multi purpose film forming foam (3×3). The main advantage of Fomtec ARC 3×3 is the 3% induction ratio on ALL class B fires, including polar solvents, in fresh or seawater.
Characteristics for film forming foam are that it spreads rapidly across a fire. As a result, it is highly effective against hydrocarbon fires. Adding special polymers ensures it is also highly effective against polar solvents.
The low surface tension of the water foam concentrate solution enables the aqueous film, which is heavier than the burning liquid, to float on top of the hydrocarbon liquid surface.
When applied on polar solvents a polymeric membrane makes it possible for the foam blanket to extinguish effectively. This works also on foam destroying liquids such as MTBE.
Application
Fomtec ARC 3×3 is intended for use on class B hydrocarbon fuel as well as on polar solvent e.g. Isopropanol, Methanol and other foam destroying fuels such as MTBE. It uses only half the quantity to extinguish polar solvent fires in comparison to the traditional 3×6 foam concentrates. It can be used with both aspirating and non-aspirating discharge devices. It is compatible with all dry chemical powders.

AFFF ARC 3×3 S supplied by Dafo Fomtec
Telephone: +46 850 640 566 Email: Click to email Website: Click to visit website
To receive more details please complete the request form below.
Other products by Fomtec


























