BROWSE CATEGORIES
- Alarms
- » Sounders
- Breathing Apparatus
- » BA Compressors
- » SCBA
- Fire Pumps
- Fire Suppression Systems
- Fire Vehicles
- Firefighting Foam
- Firefighter Clothing
- Firefighter Training
- Firefighting Equipment
- » Couplings
- » Firefighting Blankets
- » Hose
- » Hose Reels
- » Monitors
- » Nozzles
- » PPV Fans & Blowers
- » Trailers
- Foam Equipment
- Gas Monitors
- HazMat Handling
- Personal Protective Equipment
- Rescue Equipment
- Rescue Tools
- » Combi Tools
- » Cutters
- » Fire Rescue Tools
- » Power Units
- » Ram Jacks
- » Spreaders
- Thermal Imaging Equipment
- Torches & Scene Lighting
- Vehicle Lightbars & Sirens
- Water & Ice Rescue
Home » Products » Rescue Equipment » Safety Cushions » Vetter Safety Cushions SP 16 / SP 25
Vetter Safety Cushions SP 16 / SP 25
Supplied by Vetter.
Fast rescue from heights up to 25 metres (80 ft.).
- Rescue from up to 8 floors
- Easy to carry, even when set up
- Fast setup
- Psychologically optimised

(Easily positioned by 2 persons)
Vetter safety cushions* provide fast help when space is restricted at the rescue site or when facades are inaccessible to aerial ladder trucks. That way, you are ideally equipped even for difficult operational situations. Quickly set up and easily transported, the Vetter SP 16 and SP 25 safety cushions make it easier to gain access to the rear sides or courtyards of buildings. Our safety cushions also offer a safe solution for the rescue of trapped rescue personnel.

(Psychologically optimised surface “Blue circle” reduces fear)
Neon-yellow side walls improve the visibility of our safety cushions at night or in bad weather. The landing areas are psychologically optimised: the blue circle − developed with experienced psychologist Prof. Horst Schuh − has been shown to reduce the crippling fear experienced by the jumper.
Our safety cushions have been tested by an independent institution in accordance with or based on the DIN 14151 T 1 and T 3. This standard requires elaborate testing including many drop tests with different falling weights and drop positions. To measure impact deceleration, a kind of crash test with dummies is especially important. After all, it is most essential to prevent jumping persons from hitting too hard, breaking through to the ground, or even bouncing back from out of the cushion. In short: Only with a certified safety cushion, you protect a jumping person and your rescue team optimally from avoidable injuries.
* These safety cushions are not intended for sale in the USA.

(The SP 16 can be set up in 30 seconds)
Available in 2 sizes:
SP 25 for jump heights up to 25 m / 80 ft. (8 floors) and
SP 16 for jump heights up to 16 m / 51.2 ft. (5 floors).
In operation ...
- Fires in buildings with up to 8 floors / 25 m (80 ft.) (SP 25)
- Safeguarding for high-angle rescue
- Areas inaccessible to aerial ladder trucks
Good reasons:
- Only 2 or 4 persons needed for setup
- Outer cover of flame-resistant, tear-proof material
- SP 16 approved according to DIN 14151 T1 and T3
- SP 25 tested based on DIN 14151 T1 and T3
Guaranteed quality:
- Individually tested with falling weights
- Dated inspection seal
- Integrated safety valve
- 2-year guarantee
Our safety cushions are the result of meticulous handwork, so we can also produce our safety cushions with other visual designs according to your wishes. Just ask us. We’ll be pleased to advise you.

Product Image

