Jolly Fireguard 2.0 Boot
The Jolly Fireguard 2.0 Boot (9381GA) has a full-grain cowhide leather, waterproofed, black, 2.0-2.2 mm thick upper with a collar of soft aniline leather, waterproofed, 1.1 – 1.2 mm thick, padded with foam to improve fitting comfort.
- The ultimate fire-fighters boot with new design and advanced weareability
- Upper of full grain leather, black, water repellent treated, and microfiber inserts (breathability is 600% higher than the European Standard EN ISO 20345 5.4.6 requirement)
- New asymmetric aluminum safety toecap 200J, very light, with a wider volume to offer a better fitting comfort
- New last with a wider fit
- Excellent grip on uneven grounds and on stairs (the outsole is 40% more durable than the European Standard EN ISO 20345 5.8.3 requirement)
- Lining GORE-TEX® Performance Comfort Footwear, excellent for various climate conditions and for outdoor activities
- Water resistant boot tested to 500.000 flexing cycles according to the European Standard EN ISO 20345-6.2.5
- Quick release system by total opening zipper easy and fast to clean and new selflocking slider
- Functional rear and front flexors to improve flexibility and comfort
- Front and rear abrasion resistant rubber protections
- 3D memory foam ankle protection
- Reinforced leather rear pull-on loop
- Outsole resistant to fuel oil, heat and flame resistant, with composite antiperforation insert; the sole bonding strength is 50% higher than the European Standard EN ISO 20345 220.127.116.11 requirements; SRC slip resistance.
- The energy absorption in the heel area is 80% higher than the European Standard EN ISO 20345 6.2.4 requirement
- The heat insulation (sandbath test) is 20% higher than the European Standard EN15090 6.3.1 requirement
- New tread with red cleats to monitor the wearing level of the outsole (according to the European Standard EN 15090 Annex C)
The Jolly Fireguard 2.0 Boot is anatomically shaped, made out of a layer of moisture transmitting felt (80% PES-20% VISCOSA), and with an upper covering made of anti abrasion non-woven material 100% PA. In the heel area is positioned an insert of EVA foam for the best comfort of the foot enabling to preserve the foot anatomy and to increase the energy absorption on the heel.
Average 8.0 mm thick composite insole made by a multilayer construction using special antiperforation material “Zero mm Perforation” at 1100 N according to the standard EN 12568:2010. Textile antiperforation insoles, compared to the old style metal plates, offer considerable ergonomics and safety advantages: wider protective surface, flexibility, insulation, moisture absorption, reduced weight.
The Jolly Fireguard 2.0 Boot has a nitrile rubber cemented sole, heat resistant at 300°C, antistatic, oil and petrol resistant, high wear-resistant, slip-resistant SRC. The red cleats of the tread enable the wearer to monitor the wearing level of the outsole (according to the European Standard EN 15090 Annex C). Self-cleaning and foreign objects + debris free granted by the peculiar structure of cleats and running surface. The
high energy absorption in the heel area is given by the rubber compound of the outsole, by the height and shape of its cleats. The height and shape of its inner net, with air cushion, improve both shock absorbing but also thermal properties.
Fill out the form below and we will contact you with further details on this product and its manufacture..
Other products from Jolly Safety Footwear
For over 35 years Jolly Safety Footwear has been supplying professional footwear to people who dedicate their lives to protection and safety.